Replacing Double Glazed Window Handle
Replacing a double-glazed windows handle is relatively easy provided you follow the right steps. First, you must identify the type of handle you are replacing and determine the spindle size.
Cockspur handles are still sometimes used in older uPVC windows, but they have a different step height in comparison to aluminum counterparts (also known as spade handles). This means that they require an extended spindle.
Take a measurement of the Spindle
In the case of replacing windows with double glazing, it is essential to measure the spindle length to ensure you're purchasing the correct replacement. Spindle length is the distance the handle extends from the base plate or the depth it goes into the lock. It can vary from handle to handle. It is important to not remove the old handle while measuring the spindle. You might not be capable of getting a reliable reading in the event that you do.
In general, you can anticipate that the new handle will include a spinning part. However, the size of the spindle may differ between different handles and manufacturers so it is advisable to verify when purchasing one. Ideally, you should purchase the handle and spindle together to reduce time and effort.
Espag handles are typically the most common type of handle used in uPVC windows. They operate with a locking mechanism that is concealed inside the frame to allow you to open and close them. They are available in a variety of styles and colours to fit your home. When selecting an Espag handle for your home, be aware of the spindle's dimensions as it can affect the security of windows.
The handles are available in various sizes and can be rotated to the left or to the right, depending on your preference. These handles are an easy and efficient solution for double-glazed windows.
The tilt and turn window handle is a popular handle. These handles are usually big and sturdy, since they lock in two different places when opening the windows. They are available in various styles such as stainless steel and chrome. They can also be made from brass or white uPVC to match ironmongery that is already in use.
Finally, there are cockspur handles which are a more traditional type of window handle, with an elongated spur that pushes upwards against the wedge on the frame. They are a simple and effective choice for double-glazed windows. They come in various sizes of nose and nibs, to suit a variety of profiles.
Remove the Handle
There are several handles that can be used with uPVC double-glazed windows. The most common type are Espag handles, which have a spindle that runs through them and is connected to the locking mechanism of the frame of the window. Other handles include tilt-and turn handles that allow you to tilt the window to allow for ventilation or open it completely. They're generally heavier and have more complex mechanisms, but they also offer greater security. Certain styles of handles can be used with a key lock, which provides additional security for your home.
It is important to inspect the handle before you replace it. This will allow you to determine if the need for a new handle is necessary or if the existing handle needs to be adjusted or replaced. If the handle is broken then it needs to be replaced completely.
If tilt turn window handles repairmywindowsanddoors.co.uk is loose, it might be necessary to tighten it or tighten. Locate the screws in the handle with a screwdriver and remove them. Be careful not to use a power-tool because it could cause damage to the window frame, or the handle. After the screws are removed, put them in a safe location.
Once the handle is detached from the window frame, you can then remove the handle from the frame and replace it with a brand new one. Start by aligning the new handle with the holes in the window frame. Once you're happy with the alignment, screw into the new handle.
Test the newly installed window handle after you've finished by shutting and opening the window several times. If you notice any looseness or wobbling, it is crucial to tighten the screw, as this could cause the window handle to become unstable and potentially fall off.
If you're in search of a replacement window handle, we have a variety of options in black uPVC, white chrome, brass, and stainless steel. We have espag handles, inline handles, cranked handles, and tilt and turn handle for all kinds of uPVC windows as well as timber windows and aluminium frames. Based on your preferences we also have slimline handles that reduce the overall size of your handles which is ideal for situations where space is a problem.
Remove the Screws
The screws of a window handle are usually covered with plastic screws that you'll need to take off prior to installing new handles. You can remove them using a screwdriver, or even your fingernail. They are usually located between the handle and its substructure in its open position. Make sure you don't lose any screws while removing the caps.
Depending on your requirements There are a variety of options for the type of handle you decide to replace. For instance, if seeking something more sleek than the standard handle, slimline models are a good choice. These handles are designed to fit on the same spindle as standard handles, but are smaller and won't interfere with shutters or blinds. You can also select from stainless steel, brass, and chrome to match the ironmongery you have in your home.
After removing the old handle, you are able to begin creating your new. Before you decide on a replacement, you'll be required to determine the kind of handle you have and measure its spindle length. You'll need the new handle to be the right size for your uPVC window, and the screw holes should match your existing holes.
If you're ready to put in the new handle, you'll need to make sure that it is in the open position and that the spindle is properly positioned. Then, align the holes that fix the handle with the hole in the window, and insert the screws or pins. Be careful not to tighten too much them, as this may cause the window frame crack.
You will need to test the handle by locking and unlocking the window. It is recommended to do this a few times to ensure everything works properly, and to check for any issues with the locking mechanism. If you are satisfied with the performance of the new window handle you can replace the screw caps and replace the cover.
Fit the New Handle
A uPVC window handle is typically designed to last for many years however, it could become damaged and require replacement. It is crucial to determine the cause of damage before deciding on the next step.
In the majority of cases, a loose handle on a window has to be tightened in order to fix it. This will require taking off the handle in order to find the screws that secure it. Normally these will be concealed on the inside face of the handle, however they are easily found by using a screwdriver, or a pair of pliers. Once these have been removed, the handle can be detached from the spindle.
After the handle that was used has been removed, you can replace it with a new handle. It is a straightforward process but you should take care to make sure that the screws are securely in place. The handle must also be properly positioned and locked into place to ensure that it will not be removed again.
Based on the kind of window you have, there are different types of handles that you can use. They include Cockspur handles as well as tilt and turn handles, and Espag locks. Each has its own characteristics, so you have to make sure that you use the right handle for your window.
If you are replacing an Cadenza handle, for example it is crucial to ensure that you have an identical handle with respect to blade design and fixing centres. If you use an angled blade handle instead of a flat one, an angled blade handle should be used, then the blade could break.
In general replacing a double-glazed window handle is a relatively easy process. It is important to remember that there are many different styles and sizes of uPVC handles. So, it is important to determine the size of the spindle prior to purchasing a replacement handle. If you follow these steps you should be able to install a replacement handle in no time.